Products/منتجات

Calcium Ion Meter Tester Gauge with 0.02 to 4000ppm Ion Range and 2 to 5 Ion Calibration Points , China made
20/11/2026
XANTHAN GUM 25 kg bag/كيس XANTHAN GUM 25 كجم
20/11/2026
Show all

Calcium Ion Meter Horiba LAQUAtwin Ca-11 ,portable, Spain made

35,960.00EGP

Flash Sale — Ends Soon!
Sold By: Lab Supply Group Category:
Description

horiba laquatwin calcium meter
Horiba LAQUA Twin Calcium Meter
Only compact meter for a quick and reliable measurement of ionized calcium* at the scene using ion selective membrane.**
Applications Include: Soil testing; food quality control***; cultivation management; health management; food quality control; breeding water of coral; water hardness measurement
* A sample pre-treatment may be needed for measurement for total calcium concentrate
** Ion measurement can be affected by non-target ions
*** Detection of ion in water only; electrolytes in oils cannot be measured
Functions: 
Auto-calibration function recognizes standards and is user-selectable for either one- or two-point calibrations. 
Temperature compensation 
IP67 waterproof 
Auto hold 
Automatic power off(30 minutes)
One meter – Six different methods
Immersion – When you’re in the lab, you can test the sample in a beaker. Ensure the sensor guard cap is open.
Scoop – Use as a scoop to test water, for example from a river.
Drops – LAQUAtwin meters can measure sample volumes as low as 0.05 mL*2. Place a drop of the sample onto the sensor with a pipette. *2 Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tests (except for conductivity measurements)
Solid samples – Foods containing some moisture can be tested by placing a small piece directly onto the sensor.
Powders – LAQUAtwin meters can also test dry powders. Simply place the powder sample onto the sensor, and drop on your defined volume of pure water.
Paper and textiles – To test sheets of paper and textiles, cut up the sample into small pieces and place directly onto the sensor. Drop on your defined volume of pure water